Filter
Top Products
2
POWER SOURCES
Using Battery
1. Open the lid of the battery compartment.
2. Insert 2 "AA" Size (UM-3) alkaline batteries by matching the (+ and -) to the diagram
inside the battery compartment and close the lid. (batteries are not included)
Note: For battery operation the AC power adaptor must be disconnected from DC IN
Jack. (adaptor is not included)
When to Change the Battery
When the battery is used up, " " indicator flashes in the display. Replace all the
batteries with new alkaline batteries.
Note: Do not mix new batteries with old one.
Do not use different types of batteries together.
Using an AC Power Adapter (Not included)
1. Insert the adapter plug into the DC input jack on the unit.
2. Plug the adapter into the AC wall outlet.
3. Unplug from wall outlet when not in use.
Note: Use only a 4.5V DC , 500 mA Adapter.
PLAYING A CD
This CD player is designed to play the 8cm and 12cm CD's compact disc without using
adaptor.
Getting Start
1. Insert the headphone/earphone plug to PHONE JACK.
2. Press the OPEN button, and then the door open, put a disc into the CD
compartment with label side upward.
3. Push the disc gently around the centre area until it clicks so that the disc fits into the
pivot.
4. Close the door and press the PLAY/PAUSE button once.
5. The Display will show the total number of tracks of the disc, then begin to play the
first track.
6. Adjust the Volume control.