Filter
Top Products
D.W. FEARN
VT-15 Recording Channel
26
1. Use the best quality mic cable you can. We don’t believe you have to use esoteric
wire, but do use a good cable designed for low impedance microphones. A quality
cable with gold-contact connectors is best.
2. There should be no additional cables, connectors, junction boxes, patch jacks, etc.
between the mic and the VT-15 input.
3. The output of the VT-15 should be fed directly to the recorder through the shortest
practical length of quality cable. Avoid additional cables, connectors, junction boxes,
punch blocks, or patch jacks. Use gold contact connectors if possible. Do not go
through the mixing console unless you absolutely need its features for the track you
are cutting.