Filter
Top Products
6 WWW.ONEFORALL.COM
1. IR (infra-red) Indicator
The IR Indicator animates when IR is being “sent” or
“received”. The KAMELEON 6 animated IR Indicator will
show “outgoing IR” whenever a function key is pressed.
When using the “Learning Procedure” the animated IR
indicator will show “incoming IR”. The IR Indicator will
give feedback when keys are pressed both during normal
use and in programming mode (the bottom part of the IR
indicator will blink).
2. Device keys
The TV, VCR, SAT, DVD, CD and AUD keys select the device
to be controlled. For example pressing the TV key allows
the remote to control the functions of your Television,
after pressing VCR you can operate your Video Recorder,
after pressing the SAT key you can operate your Satellite
Receiver or Cable Converter etc. (see page 10 for more
details). After pressing a device (mode) key on your
KAMELEON 6 the applicable device icon will light up, to
show the currently activated mode. Pressing the device key
will allow you to return to the main screen (TV, VCR, SAT,
CD, AUD modes).
3. MAGIC (in ”shifted” or ”programming” mode)
The MAGIC key is used to set up your KAMELEON 6 and to
access special functions. If you press this key shortly, the
screen will go into ”shifted” mode (for 10 seconds) which
will give access to some secondary functions such as color,
brightness and sleeptimer.
Programming mode
If you press the MAGIC key longer (about 3 seconds),
the KAMELEON 6 will go into ”programming” mode.
The screen will change to the “setup screen” and the
rabbit appears.
You will obtain the following setup functions:
4. SCROLL
The SCROLL key gives you the possibility to move through
the different screens (if applicable) within a certain mode
during normal use and programming mode. This only
applies in TV, VCR, SAT, CD and AUD modes.
The Keypad
DEV SET
SEARCH
MODE
KEY MAGIC
MACRO
BRIGHT
IR LEARN
IR DELETE
VOLUME
OTHER
• Device Setup mode
• Search Method
• Mode re-assignment
• How to program missing functions
• How to setup a key (A, B or C) with a Sequence
of commands
• “EL” Screen brightness adjustment
• How to copy functions from your original working
remote onto the KAMELEON 6
• Deleting learned function
• Volume punch through feature
• Channel simulation
• Variable EL On time (4 sec, 8 sec, 12 sec, 16 sec, 20 sec)
• Operational Reset
• KAMELEON 6 - Timer
• EL screen activation setting
• Code Verification
• Modem Upgrade