Filter
Top Products
QuickMedia™ 3-Channel Amplifiers Crestron QM-AMP3x80 Series
Physical Description
The AMP3x80 is housed in a black enclosure with labeling on the front and rear
panels. The front panel has a master power switch and LED to indicate AC power.
All audio input and output, Cresnet system, and power connections are made on the
rear panel. The rear panel also has a switch that bypasses Cresnet control so the
amplifier can operate in a stand-alone configuration. A pushbutton on the rear panel
with an accompanying LED is used to set the AMP3x80’s network ID. Refer to the
following illustrations of the front and rear panels and the physical views.
Two mounting ears are provided for rack mounting, and four round rubber feet are
preinstalled for stability and to prevent slippage in tabletop placement or stacking
configurations. For information on rack mounting and use of the rubber feet, refer to
“Rack Mounting” on page 12.
QM-AMP3x80MM
QM-AMP3x80SR
4 • QuickMedia™ 3-Channel Amplifiers: QM-AMP3x80 Series Operations Guide – DOC. 6272