Filter
Top Products
QuickMedia™ 3-Channel Amplifiers Crestron QM-AMP3x80 Series
The following are the earliest useable software version requirements for the PC:
• (Optional) SystemBuilder (Requires SIMPL Windows).
• SIMPL Windows version 2.05.08 or later with library update file 291.
Requires SIMPL+
®
Cross Compiler version 1.1.
• Crestron Database version 16.2.0 or later. Required by SIMPL Windows.
• Digital Media Tools software version 3.01.00 or later.
Configuring with Crestron SystemBuilder
NOTE: The AMP3x80 is configured with Crestron SystemBuilder version 1.0
software. As of press time, this version of Crestron SystemBuilder had not been
released. Please check the Crestron FTP site.
The Crestron SystemBuilder interface guides you through a few basic steps for
specifying the control system, designating rooms and touchpanels, devices, and
functionality. The Crestron SystemBuilder then configures the system, including all
touchpanel projects and control system logic, including Crestron RoomView™
management software.
The Crestron SystemBuilder is fully integrated with the Crestron suite of software
development tools, including SIMPL Windows, Cross Compiler, VT Pro-e, Crestron
Database, User IR Database, and User Modules Directory. The Crestron
SystemBuilder accesses all these tools behind the scenes, enabling you to easily
create robust systems.
SystemBuilder provides a step-by-step process that guides the user through the
process of selecting components and determining signal routing and control. The
control code and complete equipment lists are automatically generated. Crestron
SystemBuilder automatically compiles and uploads your program to the control
system.
A template is provided with SystemBuilder to allow easy configuration. After
entering the appropriate information in each step, SystemBuilder creates the control
system logic and touchpanel pages, ready to upload to the controller.
NOTE: After uploading the program to the control system and installing the
hardware, values for properties such as volume, balance, treble and bass can be
adjusted as required.
For additional details, download SystemBuilder from the Crestron website
(www.crestron.com
) and examine the extensive help file.
Configuring with SIMPL Windows
NOTE: While SIMPL Windows can be used to configure the AMP3x80, Crestron
recommends SystemBuilder and Digital Media Tools software for configuring and
tuning a QuickMedia system.
NOTE: The following are acceptable file extensions for programs that include a
QM-RMCRX and an AMP3x80, developed for specific control system types:
.smw projectname.smw (source file)
.spz projectname.spz (compiled file for 2-Series)
.usp projectname.usp (source code module for SIMPL+)
16 • QuickMedia™ 3-Channel Amplifiers: QM-AMP3x80 Series Operations Guide – DOC. 6272