Filter
Top Products
Crestron QM-AMP3x80 Series QuickMedia™ 3-Channel Amplifiers
Typical Connection Diagram When Uploading
1. Open the Crestron Viewport.
Either launch the stand-alone version of Viewport or start SIMPL
Windows and from the menu bar, select Tools | Viewport.
2. Refer to the following figure after this step. From the Viewport menu,
select Setup | Communications settings (alternatively, press Alt+D)
to open the “Port Settings” window.
Setup | Communications Settings Command
3. Select RS-232 as the connection type. Verify that an available COM
port (COM 1 is shown after this step) is selected, and that all
communication parameters and necessary options from the “Port
Settings” window are selected as shown after this step. Click the OK
button to save the settings and close the window.
Operations Guide – DOC. 6272 QuickMedia™ 3-Channel Amplifiers: QM-AMP3x80 Series • 21