Filter
Top Products
Crestron QM-AMP3x80 Series QuickMedia™ 3-Channel Amplifiers
.ir projectname.ir (user IR)
.umc projectname.umc (user macro)
.ush projectname.ush (completed SIMPL+)
SIMPL Windows is the Crestron graphical, Windows
®
-based development tool for
programming control systems. The SIMPL Windows interface provides two
workspaces: the Configuration Manager, for configuring the control system,
touchpanels, and controlled network devices; and Program Manager, for designing
the logic and functionality of the control system.
In addition, you can use the powerful Crestron Viewport utility to accomplish
multiple system tasks, such as uploading the program to the control system and
performing diagnostic functions. Together with the Crestron Database, these tools
provide you with the essential components you need to program the QM-RMCRX
and AMP3x80. Crestron software is available from the Crestron website
(www.crestron.com
) — registration is required for downloading.
NOTE: Crestron software and any files on the website are for Authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
NOTE: The information in this section assumes that the reader has knowledge of
SIMPL Windows. If not, refer to the extensive help information provided with the
software.
NOTE: In the following example, a QM-RMCRX is used as the QuickMedia
receiver for the AMP3x80.
In Configuration Manager, drag the QM-RMCRX from the Control Systems folder
of the Device Library to System Views.
QM-RMCRX System View
The System Views lower pane displays the QM-RMCRX system tree. This tree can
be expanded to display and configure the communications ports.
Expanded QM-RMCRX System Tree
Operations Guide – DOC. 6272 QuickMedia™ 3-Channel Amplifiers: QM-AMP3x80 Series • 17