Filter
Top Products
WR 3M Page 3 of 21
ENFRITESPTNLSVDKFIGRTRCZPLHUSKSLEELVLT
Safety Information:
z Always place the soldering iron in its original holder
z Remove all inflammable objects from the proximity of the hot
soldering tool.
z Use suitable protective clothing to prevent the risk of burns
associated with molten solder.
z Never leave a hot soldering iron unattended.
z Never work on electrically live circuits or components.
z Always wear eye protection when working with soldering and
desoldering applications.
The Weller WR 3M microprocessor-controlled Rework Station
corresponds to the EC Declaration of Conformity in accordance
with the basic safety requirements of Directives 89/336/EEC and
73/23EEC.
3 Packing List
− WR 3M Rework Station
− Power cord
− Air-hose adapter for Hot-Air pencil (HAP 1)
− HAP 200 Hot Air Pencil ( WR3000M only )
− WDH 30 Tool Holder ( WR3000M only )
− WP80 Soldering Iron ( WR3000M only )
− WDH 10 Tool Holder ( WR3000M only )
− DXV 80 Desoldering Iron ( WR3000M only )
− WDH 40 Tool Holder ( WR3000M only )
− WR 3M Operating Instructions
− Safety information booklet
− CD with USB software (“Firmware Updater” and “Monitor
Software”)
− USB cable
− Packing with colored tool markers
4 Description
The Weller WR 3M is a versatile Rework System for making
professional repairs to current technology electronic assemblies in
the industrial production and engineering sectors. The WR 3M has 3
independent channels for operating 3 tools simultaneously.
Fast and precise sensor sampling in the closed loop control provides
temperature accuracy and maximum temperature control under load.
All tools are recognized automatically by the WR3M and the
appropriate control parameters are set.