Filter
Top Products
5–30 Maintenance and Service Guide
Removal and Replacement Procedures
5.16 Top Cover
✎
When replacing the top cover, determine if a Bluetooth board is
installed in the defective top cover. If a board is installed, remove
it from the defective top cover and install it in the replacement top
cover. Refer to Section 5.17, “Bluetooth Board,” for instructions
on removing and installing a Bluetooth board.
1. Prepare the notebook for disassembly (Section 5.3).
2. Disconnect the wireless antenna cables from the Mini PCI
communications board (Section 5.6).
3. Remove the following components:
❏ Optical drive (Section 5.8)
❏ Keyboard (Section 5.9)
❏ Switch cover (Section 5.10)
❏ Speaker cover (Section 5.11)
❏ Display assembly (Section 5.15)
4. Turn the notebook upside down, with the front facing you.
Spare Part Number Information
Top cover (includes TouchPad and TouchPad shield)
For use with HP Pavilion zt3000 notebooks
For use with HP Compaq nx7000 and
Compaq Presario X1000 notebooks
350123-001
336983-001
325388-002.book Page 30 Friday, October 24, 2003 9:21 AM