Filter
Top Products
9
PLAYING CD
1. Push the POWER Button [5] to turn the unit on. The STANDBY INDICATOR [6] will light up.
2. Press the CD Button [14] to “CD” mode.
3. Press the OPEN/CLOSE Button [38] once to open the disc tray [42] and place CDs (label
side facing up) on the disc tray, press DISC SKIP Button [39], the carousel rotates, so you
can insert another CD. Then, press the OPEN/CLOSE Button [14] again, the CD disc tray
[42] will be closed. If no disc was loaded on the selected carousel, “no disc” will appear on
the display.
PLAY FUNCTION
Press PLAY/PAUSE Button [36] to start playing the disc from track number 1.
PAUSE FUNCTION
Press PLAY/PAUSE Button [36] when during play, pause the disc and mute the music from
play mode. To clear PAUSE mode, press the PLAY/PAUSE Button [36]. The system will
resume playing from the time of the disc was paused.
STOP FUNCTION
Press STOP Button [37] to stop playing or cleared of tracks stored.
REPEAT FUNCTION
REPEAT is a toggle command: No repeat Repeat one track Repeat all No repeat
Press the REPEAT Button once: Repeat one track; twice: Repeat all tracks; Three times: Normal
SKIP FUNCTION
Press FORWARD SKIP Button [35] to select the next track in the sequence. Press BACK-
WARD SKIP Button [35] to select the previous track in the sequence.
SEARCH FUNCTION
Press and hold the FORWARD SKIP [35] or BACKWARD SKIP Button [35] to locate a
particular point in a track during playing by monitoring the high-speed cueing sound.
Press FORWARD SKIP Button [35] to go ahead.
Press BACKWARD SKIP Button [35] to go back.
NOTE: Release the button when you reach the point in the selection that you want.
INTRO CHECK FUNCTION
Press INTRO CHECK Button, the first 10 seconds of all (programmed) tracks are played in
turn. When the end of a disc’s playlist is reached, the system will attempt to scan tracks on the
next disc in the carousel. The system will scan disc one. When all discs have been scanned
the system will enter STOP mode automatically.
PROGRAM FUNCTION
This function allows you to play the track (up to 20 tracks) of all disc in any carousel. Enter the
program procedure as below:
1. Press the MEMORY/C-ADJ. Button [31] when the disc is not turning in stop mode, the
MEMORY icon flashes on the display.
2. Press Disc SELECTOR Button [34] or DISC 1, 2, 3 to selected disc which disc you want.