Filter
Top Products
5
OPERATIONS
1. Carefully unpack the unit and speakers. Remove all packing material from around the unit.
2. Locate the unit horizontally on a heavy duty stand or firm level surface and away from the
speaker system to avoid acoustic feedback.
CONNECTIONS
1. Connect the Speaker Box speaker wire to the speaker out let on the rear of the main unit.
2. Connect the AC power cord to the AC outlet.
3. Press the POWER Button [5] to turn on the unit.
NOTE: - Before operating the unit in a new area for the first time, it is absolutely necessary to
check the operating voltage of your unit is identical with the voltage of your local
power supply.
- This unit is to be operated only at the printed power source voltage on the back panel.
- Disconnect from the wall outlet when it is not be used for an extended period of time.
SOUND CONTROL
VOLUME
Press the VOLUME Button [33] to increase the volume, and the VOLUME Button [33] to
decrease the volume.
PRESET EQUALIZER
The PRESET EQUALIZER SELECTOR [43] provides 4 different ranges of control (FLAT,
CLASSIC, ROCK AND POP ) for the audio frequency spectrum in narrow and distinct sections.
Use the selector to select the best response that suits the type of music and individual taste.
*
FLAT no indicator
BASS BOOST
Press BASS BOOST Button [32] to enhance the bass response:
- Bass Boost OFF
- Bass Boost ON (Indicator BBS)
SURROUND SOUND
This feature creates an additional 3-D effect from stereo sound which is relayed by the speakers.
Press Surround Sound to switch this effect on and off.
- Surround Sound OFF
- Surround Sound ON (Indicator Surround Sound turn on)
* If you want to enjoy the surround sound 3-D effect, you must connect two speaker (imped-
ance of 4 ohm/12.5W - 32 ohm/6.0W) boxes to the Left Surround Sound Speaker Outlet
[49] and Right Surround Sound Speaker Outlet [50].
.