Filter
Top Products
English
24
DXZ475MP
Satellite Radio Operations
This function is available when a Satellite Radio
Receiver is connected through the CeNET
cable.
This unit can control the following satellite radio
receivers:
• XM Satellite Radio Receiver: XMD1000
• XM Smart Digital Adapter: XM SDA
• SIRIUS Satellite Radio Receiver: SIRCL2,
SIRCL3
Note:
• When the function is differ depending to the
connected receiver, they are distinguished by the
following notations:
“XM”: for an XM Satellite Radio Receiver
“SIRIUS”: for a SIRIUS Satellite Radio Receiver
Selecting a Satellite Radio mode
1. Press the [
SRC
] button.
The system changes to the specified
Satellite Radio mode.
Selecting a band
1. Press the [
BND
] button to select a band.
This changes the reception band as follows:
•
XM:
XM1
➜
XM2
➜
XM3
➜
XM1 ...
•
SIRIUS:
SR1
➜
SR2
➜
SR3
➜
SR1 ...
●
Information displayed during reception
The following information is displayed when the
satellite radio cannot be received normally.
• When the receiver is turned on the first time
or after a reset: “
UPDATING
”
• When a channel is being tuned in (no signal is
yet received):
XM: “
LOADING
”, SIRIUS: “
LINKING
”
•A channel without a broadcast has been
selected:
XM: “
– – – CH
”, SIRIUS: “
INVALID CH
”
•A channel not covered by your contract:
XM: “
UPDATING
”, SIRIUS: “
CALL 888
”
↔
“
539-SIRI
” (alternated)
Confirming your SIRIUS ID
1. Press and hold the [
DISP
] button for 1
second or longer to display the ADJUST
item.
2. Press the [
x
] or [
v
] button to select “
SID
DISP
”.
3. Press the [ ] button, the display will
display the upper 6 digits.
4. Press the [
w
] or [
z
] button to switch
between the display for the upper 6 digits
and lower 6 digits.
5. To return to the previous mode, press the
[
DISP
] button.
Displaying channel labels
1. Press the [
DISP
] button to select the desired
channel label.
Channel
➜
Category
➜
Title (Artist)
➜
Radio
text
➜
Channel...
Channel selection
1. Channels are selected with the [
x
] or
[
v
] button.
∗
For details, see the following operation
descriptions.
Note:
• The audio output is muted and other button
operations are not accepted during channel
selection.
Tuning mode
There are two channel selection modes: quick
tuning mode and step tuning mode.
● Quick tuning
1. Press and hold the [x] or [v] button for
1 second or longer.
● Step tuning
1. Press the [x] or [v] button.
DXZ475MP_EN.book 24 ページ ２００６年１１月１０日 金曜日 午後４時５６分