Filter
Top Products
20
English
DXZ365MP
CD/MP3/WMA Mode Operations
• Folder random play
This function allows you to play all the tracks of
all the folders recorded on an MP3/WMA disc in
a random order.
1. Press and hold the
[
RDM
]
button for 1 second
or longer to perform folder random play.
The indications “
ALL...” and “RDM” light in the
display.
• To cancel play
1. Press the operating button previously
selected.
Operations Common to
Each Mode
To change display setting
1. Press and hold the
[
D
]
button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the
[ , ]
lever upward or downward
to select the “item name”.
“
CLOCK
(
E
)
” “SCREEN SVR” “MSG
INP
(
E
)
” “AUTO SCROL” “DIMMER”
3. Turn the
[
ROTARY
]
knob to select the “desired
setting value”.
∗ In the case of item names appearing with the
“E” suffix, after the item name, the
[
]
button
must be pressed to display the setting value.
∗ After completing settings, press the
[
D
]
button
to return to the previous mode.
• Turning the screen saver function on
or off
This unit is provided with the screen saver function
which allows you to show various kinds of patterns
and characters in the operation status indication
area of the display in a random order. You can turn
on and off this function.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
∗ The factory default setting is “ON”.
• Setting the clock
2-1. Select “CLOCK <E>”.
3-1. Press the
[
]
button.
3-2. Press the
[
,
]
lever upward or
downward to select the hour or the minute.
3-3. Turn the
[
ROTARY
]
knob to set the correct
time.
∗ The clock is displayed in 12-hour format.
3-4. Press the
[
]
button to store the time into
memory.
Note:
• You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the carʼs
battery or take out this unit, the clock is reset. While
setting the clock, if another button or operation is
selected, the clock set mode is canceled.
• Random play
This function allows you to play all tracks recorded
on a disc in a random order.
1. Press the
[
RDM
]
button to perform random
play.
The indication “
RDM” lights in the display.