Filter
Top Products
13
English
DXZ365MP
Basic Operations
Setting the Z-Enhancer
This unit are provided with 3 types of sound tone
effects stored in memory. Select the one you
prefer.
∗ The factory default setting is “Z-EHCR OFF”.
Each time you press the
[
Z
]
button, the tone effect
changes in the following order:
“Z-EHCR OFF” “BASS BOOST” “IMPACT”
“EXCITE” “Z-EHCR OFF” ...
• BASS BOOST : bass emphasized
• IMPACT : bass and treble emphasized
• EXCITE : bass and treble emphasized
mid de-emphasized
• Z-EHCR OFF : no sound effect
Adjusting the balance
1. Press the
[
A-M
]
button and select “BAL 0”.
2. Turning the
[
ROTARY
]
knob clockwise empha
-
sizes the sound from the right speaker; turning
it counterclockwise emphasizes the sound from
the left speaker.
∗ The factory default setting is “BAL 0”.
(
Adjustment range: L13 to R13
)
3. When the adjustment is complete, press the
[
A-M
]
button several times until the function
mode is reached.
Adjusting the fader
1. Press the
[
A-M
]
button and select “FAD 0”.
2. Turning the
[
ROTARY
]
knob clockwise empha
-
sizes the sound from the front speakers; turning
it counterclockwise emphasizes the sound from
the rear speakers.
∗ The factory default setting is “FAD 0”.
(
Adjustment range: F12 to R12
)
3. When the adjustment is complete, press the
[
A-M
]
button several times until the function
mode is reached.
Adjusting MAGNA BASS EX
The MAGNA BASS EX does not adjust the low
sound area like the normal sound adjustment
function, but emphasizes the deep bass sound
area to provide you with a dynamic sound.
∗ The factory default setting is off.
1. Press and hold the
[
A-M
]
button for 1 second or
longer to turn on the MAGNA BASS EX effect.
“M-B EX” lights in the display.
2. Press and hold the
[
A-M
]
button for 1 second or
longer to turn off the MAGNA BASS EX effect.
“M-B EX” goes off from the display.
BASS
(
Bass
)
: Adjustment range :
-
6 to
+
7
TREB
(
Treble
)
: Adjustment range :
-
6 to
+
6
BAL
(
Balance
)
: Adjustment range : L13 to R13
FAD
(
Fader
)
: Adjustment range : F12 to R12
∗ The display returns to the previous mode 7
seconds after the adjustment.