Filter
Top Products
8 DSH920S
English
The receiver moves to seek channels below
or above the current channel. If the channel
found when either button is released is avail-
able that channel is received. Otherwise,
seeking continues until an available channel
is found.
● Manual tuning
Any channel including channels without broad-
casts and channels not covered by the contract
can be selected during manual tuning.
1. Press and hold the [BAND] (BND) button for
1 second or longer.
∗ This changes the seek mode to manual mode
and the “MANU” indicator on the display lights.
When this operation is performed in manual
mode, the seek mode is engaged and the
“MANU” indicator on the display goes off.
Notes:
• The receiver automatically reverts to the seek
mode when the [
a
] or [
d
] button is not used for
7 seconds in the manual mode.
2. Press the [a] or [d] button. The receiver
moves to channels above or below the cur-
rent channel one by one.
3. Press and hold the [a] or [d] for 1 second
or longer.
The receiver moves to seek channels below
or above the current channel and the chan-
nel found when either button is released is
received.
Recalling a preset station
A total of 18 SIRIUS stations can be stored (6-
SR1, 6-SR2 and 6-SR2). This allows you to se-
lect your favorite SIRIUS stations and store
them in memory for later recall.
1. Press the [BND] button and select the de-
sired SIRIUS band (SR1, SR2 or SR3).
2. To recall a stored SIRIUS station, press the
desired [DIRECT] button to select that sta-
tion.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of [DIRECT] buttons for
2 seconds or longer to store the current sta-
tion into preset memory.
Sirius operation
Notes:
• When the name of a channel stored in memory is
changed by a broadcasting station, the display
may show a channel name that differs from the
stored name.
• A channel stored in memory may be discontinued
at the option of the broadcasting station.
Category selection function
SIRIUS Radio allows you to select broadcast
channel category (contents).
Receiving stations selected by
category
1. Press the [RDM] (RD) button to enter the
category selection mode.
2. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select a category.
Or, press a [DIRECT] button if the category
is preset.
3. Press [a] or [d] button to tune in a station.
This starts seek tuning and broadcast chan-
nels that meet the specified category are se-
lected. The “CA” indicator is displayed in the
function mode indication during seek tuning.
The CAT indicator lights on models without a
function mode indication.
4. Press the [RDM] (RD) button again to cancel.
Notes:
• When the category selection mode is entered, the
category of the last received channel is displayed
first.
• The category selection mode is canceled when
no channel with the selected category can be
found.
• Press the [
a
] or [
d
] button within 7 seconds af-
ter a channel has been set to continue seeking
channels up or down. The category selection
mode is canceled and normal reception is re-
sumed if no operation is performed for 7 seconds.
Presetting a category
A category can be preset by registering specific
categories in [DIRECT] buttons 1 to 6. Then the
desired category can be recalled by pressing
the corresponding [DIRECT] button.
1. Press the [RDM] (RD) button to enter the
category mode.
2. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select a category.
3. Press and hold one [DIRECT] button for 2
seconds or longer to store the current cat-
egory in the preset memory.