Filter
Top Products
16 DRX8575z
Other Handy Functions
Mode Number of titles
Radio mode 30 titles
CD mode 50 titles
TV mode 15 titles
CD changer mode Number of titles
CDC655z connected 60 titles
CDC655Tz connected 100 titles
CDC1255z connected 50 titles
Setting the clock
1.
Press and hold ADJ button 4 for 1 second or
longer to switch to the adjustment selection display.
2. Press the right or left side of SEARCH button
% to select “CLOCK”.
3. Press ENT button 2.
4. Press the right or left side of SEARCH button
% to select the hour or the minute.
5. Turn the Rotary knob & clockwise or
counterclockwise to set the correct time.
∗ The clock is displayed in 12-hour format.
6.
Press ENT button 2 to store the time into memory.
7.
Press ADJ button 4 to return to the previous mode.
Note:
•
You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the car’s
battery or take out this unit, the clock is reset. While
setting the clock, if another button or operation is
selected, the clock set mode is canceled.
Dimmer level setting
You can reduce the display illumination linked to
the car illumination.
∗ The factory default setting is “LEVEL 3”.
1.
Press and hold ADJ button $ for 1 seconds or
longer to switch to the adjustment selection display.
2. Press the right or left side of SEARCH button
% to select “DIMMER LV”.
3. Press ENT button 2.
4. Turn the Rotary knob & clockwise or
counterclockwise to set the dimmer level.
Choose the dimmer level from the following.
“OFF”, “LEVEL 1”, “LEVEL 2”, “LEVEL 3”,
“LEVEL 4”, “LEVEL 5”
LEVEL 1 to LEVEL 5:
The greater the dimmer level is, the more the
illumination is reduced.
OFF:
If the car illumination is turned on, reduction
of the display illumination does not occur.
5. Pressing ENT button 2 returns to the
adjustment selection display.
6.
Press ADJ button $ to return to the previous mode.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for radio stations and
CDs. The numbers of titles that can be entered
for each mode are as follows.
1. Press FNC button 3 to select the mode you want
to enter a title. (radio, CD, CD changer or TV)
∗ Titles cannot be entered for MDs with this unit.
2. Select and play a CD or a CD in the CD changer
or tune to an appropriate TV or radio station.
3. Press DISP button ! and display the subtitle.
4. Press TITLE button 4. “TITL” appears in the
display and the cursor position flashes.
5. Press the right or left side of SEARCH button
% to move the cursor.
6. Press DISP button ! to select the character.
Each time you press DISP button !, the
character changes in the following order:
Capital letters ➜ Small letters ➜ Numbers ➜
Symbols ➜ Umlaut ➜ Capital letters...
7. Turn the Rotary knob & to select the desired
character. Turning the Rotary knob &
clockwise moves the cursor to the next
character; turning it counterclockwise moves
the cursor to the previous character.
8. Repeat steps 5 to 7 to enter up to 10
characters for the title.
9. Press and hold ENT button 2 for 2 seconds
or longer to store the title into memory and
cancel title input mode.
Clearing titles
1. Play the CD or CD in the CD changer or tune
the radio station or TV station that you want
to clear the title for.
2. Press DISP button ! and display the subtitle.
3.
Press TITLE button 4. “TITL” appears in the display
and the display switches to title input display.
4. Press BND button #.
5.
Press and hold ENT button 2 for 2 seconds or
longer to clear the title and cancel title input mode.
Adjusting the display contrast
You can adjust the display contrast according to
the angle of installation of the unit.