Filter
Top Products
14 DRX8575z
Radio Operations
CD Operations
Preset scan
Preset scan receives the stations stored in preset
memory in order. This function is useful when
searching for desired station in memory.
1. Press PS button 5.
2. When the desired station is tuned in, press
PS button 5 again to continue receiving that
station.
Note:
• Be careful not to press and hold PS button
5
for
2 seconds or longer, otherwise the auto store
function engages and the unit starts storing
stations.
Instant station recall (ISR)
Instant station recall is a special radio preset that
instantly accesses a favorite radio station at the
touch of a button. The ISR function even operates
with the unit in other modes.
● ISR memory
1. Select the station that you wish to store in ISR
memory.
2. Press and hold ISR button " for 2 seconds
or longer.
● Recalling a station with ISR
In any mode, pressing ISR button " illuminates
“ISR” in the display, turns on the radio function,
and tunes the selected radio station. Press ISR
button " again to return to the previous mode.
Loading a CD
1. Press OPEN button 1 to access the CD
insertion slot behind the FLIP DOWN PANEL.
CAUTION
.
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
Note:
• If the FLIP DOWN PANEL does not open fully,
gently open with your hand.
2. Insert a CD into the center of the insertion
slot with the label side facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD insertion slot.
• If the CD is not inserted easily, there may be
another CD in the mechanism or the unit may
require service.
• Discs not bearing the mark and CD-ROMs
cannot be played by this unit.
Loading 3" (8 cm) compact discs
∗ No adapter is required to play a 3" CD.
∗ Insert the 3" CD into the center of the insertion slot.
∗ When a 3" CD is loaded, “SINGLE” illuminates in
the display.
3. Close the FLIP DOWN PANEL.
Note:
• After loading a CD, always close the FLIP DOWN
PANEL.
Listening to a CD already inserted
Press FNC button 3 to select the CD mode. Play
starts automatically. If no CD is loaded in the unit,
“NO DISC” appears in the display.
Pausing play
1. Press Play/pause button 2 to pause play.
“PAUSE” appears in the display.
2. To resume CD play, press Play/pause button
2 again.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
1. Press DISP button ! to display the title.
2. Each time you press and hold DISP button
! for 1 second or longer, the title display
changes in the following order:
User title (disc) ➜ CD-text title (disc) ➜ CD-
text title (track) ➜ user title (disc)...