Filter
Top Products
DRX8575z 13
Radio Operations
Changing the reception area
This unit is initially set to USA frequency intervals
of 10kHz for AM and 200kHz for FM. When using it
outside the USA, the frequency reception range
can be switched to the intervals below.
● Setting the reception area
1. Press BND button # and select the desired
radio band. (FM or AM)
2. While pressing RDM button 7, each time you
press and hold the number “1” Preset button
9 for 2 seconds or longer, the reception area
switches from inside the USA to outside the
USA or from outside the USA to inside the USA.
∗ Any station preset memories are lost when the
reception area is changed.
Listening to the radio
1. Press FNC button 3 and select the radio
mode.
2. Press BND button # and select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3. Press the right or left side of SEARCH button
% to tune in the desired station.
Tuning
There are three types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek tuning
1. Press BND button # and select the desired
band. (FM or AM)
∗ If “MANU” is illuminated in the display, press
and hold BND button # for 1 second or longer.
“MANU” in the display disappears and seek
tuning is now available.
2. Press the right or left side of SEARCH button
% to automatically seek a station. When the
right side of SEARCH button % is pressed,
the station is sought in the direction of higher
frequencies; if the left side of SEARCH button
% is pressed, the station is sought in the
direction of lower frequencies.
Manual tuning
There are 2 ways available: Quick tuning and step
tuning. When you are in the step tuning mode,
the frequency changes one step at a time. In
quick tuning mode, you can quickly tune the
desired frequency.
1. Press BND button # and select the desired
band. (FM or AM)
∗ If “MANU” is not illuminated in the display, press
and hold BND button # for 1 second or longer.
“MANU” is illuminated in the display and
manual tuning is now available.
2. Tune into a station.
● Quick tuning:
Press and hold the right or left side of
SEARCH button % for 1 second or longer to
tune in a station.
● Step tuning:
Press the right or left side of SEARCH button
% to manually tune in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exist to store individual radio stations
in memory. Pressing the corresponding preset
button recalls the stored radio frequency
automatically.
1. Press BND button # and select the desired
band. (FM or AM)
2. Press the corresponding Preset button 9 to
recall the stored station.
∗ Press and hold one of Preset buttons 9 for 2
seconds or longer to store that station into
preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning, or preset tuning.
2. Press and hold one of Preset buttons 9 for 2
seconds or longer to store the current station
into preset memory.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially. If 6
receivable stations cannot be received, a
previously stored station remains unoverwritten
at the memory position.
1. Press BND button # and select the desired
band. (FM or AM)
2. Press and hold AS button 5 for 2 seconds or
longer. The stations with good reception are
stored automatically to the preset buttons.