Clarion ADB340MP Stereo System User Manual


 
280-7740-00
ADB340MP/ADB341MP 17
4. Press the [TITLE] button to return to the pre-
vious mode.
Message display
When the unit is powered on or off, a message is
displayed. The user can turn this message dis-
play on or off.
The factory default setting is ON.
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
2. Press the [ ] or [ ] button to select
MESSAGE.
3. Turning the [VOLUME] knob clockwise to set
the message display to ON, or turning the
[VOLUME] knob counterclockwise to set the
message display to OFF.
4. Press the [TITLE] button to return to the pre-
vious mode.
Setting the method for title scroll
Set how to scroll in CD-TEXT or MP3 Title.
The factory default setting is ON.
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
2. Press the [ ] or [ ] button to select
SCROLL.
3. Turning the [VOLUME] knob clockwise or
counterclockwise and select ON or OFF.
ON:
To scroll automatically.
OFF:
To scroll just 1 time when the title was changed
or the title key was pressed.
4. Press the [TITLE] button to return to the pre-
vious mode.
Turning the screen saver function
on or off
This unit is provided with the screen saver func-
tion which allows you to show various kinds of
patterns and characters in the Operation Status
indication area of the display. You can turn on
and off this function.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
The factory default setting is OFF.
Operations Common to Each Mode
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
2. Press the [ ] or [ ] button and select
SCRNSVR .
3. Press the [ ] button.
4. Turning the [VOLUME] knob clockwise to
ON or counterclockwise to OFF.
5. Press the [TITLE] button to return to the pre-
vious mode.
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
The factory default setting is 5. (Adjustment level:
0 to 10)
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
2. Press the [ ] or [ ] button to select
CONTRAST.
3. Turning the [VOLUME] knob clockwise or
counterclockwise to adjust the contrast.
4. Press the [TITLE] button to return to the pre-
vious mode.
Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
The factory default setting is MID.
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
2. Press the [ ] or [ ] button to select AUX
SENS.
3. Turning the [VOLUME] knob clockwise or
counterclockwise as needed and select from
HIGH, MID or LOW.
4. Press the [TITLE] button to return to the pre-
vious mode.
Setting the DEMO mode
The demonstration of each function is repeatedly
shown on the display screen. The demonstra-
tion starts about few seconds after power off.
The factory default setting is ON.
1. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the adjustment se-
lection display.
03.12.17, 0:08 PM17