Filter
Top Products
280-7740-00
ADB340MP/ADB341MP 15
Tape Operations
Loading a tape
1. Press the [OPEN] button to open the flip down
panel.
2. Load a tape into the cassette tape insertion
slot.
Ejecting a tape
1. Press the [OPEN] button to open the flip down
panel.
2. Press the [TAPE EJECT] button to eject a
tape. Take it out from the ejected position.
∗ The radio mode is selected automatically few sec-
onds after the [TAPE EJECT] button is pressed.
CAUTION
• Be sure to use this unit with the Flip down
panel closed.
• Do not put any object or use it like a tray
when the Flip down panel is open in a lying
position.
• Be careful not to pinch your finger or hands
when opening and closing the Flip down
panel.
Listening to a tape already inserted
Press the [FNC] button to select the tape mode.
Play starts automatically. If no tape is loaded in
the unit, “NO CASS” appears in the display.
● Listening to another source while using FF
or REW and APC (“monitor mode”)
Pressing the [FNC] button allows to set radio
mode or CD/MP3 mode while fast-forwarding the
tape, rewinding it, or searching for the begining
of a tune in it.
Note:
• Use the [FNC] button and select the tape function
to resume tape playback.
Pausing play
1. Press the [ ] button to pause play.
“PAUSE” appears in the display.
2. To resume tape play, press the [ ] button
again.
Switching to the other side of the tape
1. Press the [BND] button to change tape direc-
tion and playback.
∗ The tape mechanism automatically reverses di-
rection and engage playback at the end of the tape
(auto reverse).
Fast-forward/fast-backward
● Fast-forward
Press the [ ] button.
● Fast-backward
Press the [ ] button.
● Canceling FF/REW
Press the [ ] button.
APC (Auto Program Control) function
The APC function allows the tape to skip forward
to the beginning of the next track or rewind to
the start of the current track.
● Skipping forward to the next track (“APC-
FF”)
During tape playback, press the [ ] button
twice to fast-forward to the next track. The next
track stars playing.
● Skipping backward to the current track
(“APC-REW”)
During tape playback, press the [ ] button
twice to rewind to the start of the current track.
The current track plays from the beginning.
● Canceling FF/REW APC to resume playback
Press the [ ] button.
Intro tape scan play
The intro tape scan allows the first 10 seconds
of all the tracks on the tape to be played. This
function continues on the tape until it is canceled.
1. Press the [SCN] button to start Intro tape scan.
“SCN” lights in the display.
2. To cancel the intro tape scan, press the [SCN]
button again. “SCN” goes off from the display
and the current track continues to play.
∗ When the end of the tape is reached during
the intro tape scan, the tape mechanism auto-
matically reverses direction and continues the
intro tape scan.
∗ If you select another mode during the intro tape
scan, the mechanism automatically makes the
intro tape scan stop when it finds the next
track(APC function).
03.12.17, 0:08 PM15