Cambridge SoundWorks AVS550 Stereo Amplifier User Manual


 
27
IMAGE ZOOM:
The AVS550 provides both zoom in/out for DVD, VCD, and
SVCD and zoom with pan functions for JPEG pictures.
Press the ZOOM key to select the zoom ratio
options. When ZOOM mode is on, any picture will
be displayed at the last ratio selected by the user.
An OSD message will indicate the current ratio.
When ZOOM mode is on, << and >> buttons are
used to control the ratio of zoom in/out.
With zoom ratios above 100%, use the <, >, , and
v buttons to pan to different areas of the picture.
When ZOOM mode is off, each picture is scaled to
fit the whole screen.
Note: during ZOOM mode, slide show transition and
image transformation are disabled.
PROGRAMMED PLAYBACK:
With the disc stopped, you may program a playing
sequence for CD playback.
1. Press the PROGRAM key to enter programming
mode.
2. Press the number key corresponding to the first
track you wish to play. The OSD will display P01:
(Track #).
3. Press the number key for the next track, the OSD
will read P02: (Track #).
4. Continue until all tracks are programmed, then
press PLAY or ENTER to begin programmed play. If
you make a mistake during programming, press
CLEAR to erase the last entry.
VOL SETUP:
The Volume Setup button lets you fine tune the individ-
ual channel levels while the program is playing.
1. Press the VOL SETUP button on the remote to enter
the menu.
2. Use the and v buttons to select the channel you
wish to adjust, then press ENTER. Use the and v
buttons to adjust the level.
3. Use the < button to return to the top level.
4. Press VOL SETUP again to return to normal viewing.
v
v
v