Filter
Top Products
22
Select AV Input type:
You may skip this step if the source connected to AV1
has S-Video output. It is only necessary if the source is
exclusively connected with a CVBS cable.
A. Select AV1 Input.
B. Select CVBS ONLY. Otherwise keep the default set-
ting of S-Video/Both.
D. Press ENTER to confirm your selection, then press
< to return to the previous menu level.
E. Repeat for AV2 if necessary.
Press SETUP to exit the menu and return to normal
operation.
You may now begin to enjoy your Megatheater system.
Additional optional setup features are covered in the
ADVANCED SETUP chapter later in this manual.