Cambridge Audio 840A V2 Stereo Amplifier User Manual


 
4
Thank you for purchasing this Azur 840A V2 Class XD Integrated
Amplifier. We hope that you will enjoy many years of listening
pleasure from it.
The 840A V2 features our unique proprietary amplifier topology; Class
XD™, designed to eliminate crossover distortion at low signal levels.
By actively displacing the crossover point this technology creates a
region of pure Class-A operation where the crossover zone would
otherwise be before moving into an enhanced form of Class B at higher
levels. It should not be confused with Class AB, which gives a small
area of Class A, but at the cost of higher distortion as soon as the
signal level moves outside the AB area. Class XD circuitry not only
removes crossover distortion from the zero-crossing point but also
reduces distortion in the other parts of the amplifier's output range.
This V2 version of the 840A features our latest development of Class
XD with many tweaks and enhancements from our on-going research
resulting in our best sounding implementation to date.
A white paper on this patent pending technology is available on our
website: www.cambridge-audio.com
Please note that because of the Class XD technology the 840A V2 runs
slightly warmer than a conventional Class B/AB amplifier and the
ventilation slots on the top of the unit must not be obstructed.
Other features include the use of precision resistor ladders switched by
gold plated relay contacts for the volume and balance controls rather
than the more common solid-state or volume potentiometer schemes.
Volume is controllable in 1 dB steps over most of the range, giving very
fine control, an accurate logarithmic law and superbly accurate channel
balance. Input switching is also by high quality gold contact relays.
The 840A V2 features separate transformer secondaries for left and
right channels, twin rectifiers and separate PSU's for dual mono
operation of the left and right power amplifiers. A separate transformer
supplies the preamp making the 840A V2 effectively a Pre and Power
amp combination in one box.
Input 1 features a balanced input using XLRs giving optimal
performance with equipment such as the matching 840C Upsampling
CD player which features balanced outputs.
The casework combines massive structural rigidity with careful damping
and control of acoustic resonance. An Azur Navigator remote control is
also provided, giving full remote control of your amplifier in an attractive
and easy to use handset.
We have also included support for multi-room use. By plugging in one
or two external Cambridge Audio Incognito keypads and a power supply
unit your amplifier can become the hub of a simple multi-room system.
In addition, Control Bus Input/Output, IR Emitter Input and RS232
control are featured making it easy to integrate the 840A V2 into a
Custom Installation system if desired.
Your amplifier can only be as good as the system it is connected to.
Please do not compromise on your source equipment, speakers or
cabling. Naturally we particularly recommend models from the
Cambridge Audio Azur range. These have been designed to the same
exacting standards as this amplifier. Your dealer can also supply
excellent quality Cambridge Audio interconnects to ensure your system
realises its full potential.
Thank you for taking the time to read this manual; we do recommend
you keep it for future reference.
Matthew Bramble,
Cambridge Audio Technical Director
and the Amplifier design team
Contents Introduction
Important safety instructions..........................................................2
Limited warranty...........................................................................3
Contents......................................................................................4
Introduction .................................................................................4
Rear panel connections.................................................................5
Front panel controls .....................................................................6
Remote control ............................................................................7
iPod compatibility .........................................................................7
Connections ................................................................................8
Operating instructions .................................................................10
Amplifier setup...........................................................................10
Multi-Room connections .............................................................12
Custom installation use...............................................................13
CAP5 protection system..............................................................14
Troubleshooting..........................................................................15
Technical specifications...............................................................15
Make sure you register your purchase.
Visit: www.cambridgeaudio.com/sts
By registering, you’ll be the first to know about:
Future product releases
Software upgrades
News, events and exclusive offers plus
competitions!
This guide is designed to make installing and using this product
as easy as possible. Information in this document has been
carefully checked for accuracy at the time of printing; however,
Cambridge Audio's policy is one of continuous improvement,
therefore design and specifications are subject to change
without prior notice.
This document contains proprietary information protected by
copyright. All rights are reserved. No part of this manual may be
reproduced by any mechanical, electronic or other means, in any
form, without prior written permission of the manufacturer. All
trademarks and registered trademarks are the property of their
respective owners.
Incognito and Incognito Ready are trademarks of Cambridge
Audio Ltd. All rights reserved.
Class XD Technology International Patent Pending Cambridge
Audio Ltd.
© Copyright Cambridge Audio Ltd 2008
A-BUS and A-BUS Ready are registered trademarks of
LeisureTech Electronics Pty Ltd Australia. This product may be
covered by one of more of the following patents US 7,181,023,
6,389,139, EP 1004222, AU 739808, NZ 502982, Mexico
Z41196, Canada CA2301062.
iPod and Apple are trademarks of Apple Inc., registered in the
U.S. and other countries.