Filter
Top Products
Painting the Speakers
If you intend to paint the speakers, it’s best to
do so before installation.
1. Remove the speaker grille. Carefully pry at
each corner with an awl or a small screwdriver.
2. Use the form-fitting painting mask provided
to paint the housing. Cover the slots with
masking tape.
3. After painting, remove the mask by carefully
inserting a screwdriver into the slots. Do not
puncture the drivers behind the mask with the
screwdriver.
4. When painting the grilles, be certain that the
paint does not fill the perforated holes in the
metal. If using spray paint, use two thin coats.
If using house paint or other canned paint, thin
the paint to avoid filling the holes.
5
Boston
Boston
Use masking tape
to cover slots