Filter
Top Products
Before going through the check list, check wiring connection. If any of the problems persist after check
list has been made, consult your nearest service dealer.
No power or no sound
Noise in broadcasts
Cannot play disc
Car engine is not on. Turn the car engine on.
Signals are too weak. Select other stations with stronger signals.
Ensure tha the disc label is inserted with the printed side facing up.
Cable is not correctly connected. Check connections.
Check the connection of the car antenna.
Wipe the disc with fibre cleaning cloth from the centre to the edge in a straight line.
Fuse is burnt. Replace fuse.
Change broadcast from Stereo to mono.
This disc may be defective. Play another disc.
Ensure that the CD is a finalised CD/CD-R/CD-RW.
Ensure that the CD is not encoded with copyright protection techn-ologies.
Volume is in minimum. Adjust volume to a desired level.
If the above solutions cannot help, press the RESET button.
Ensure that the track played is of a compatible format.
The CD Skips tracks
Preset stations lost
Display show ERR-1
Display show ERR-3
Display show ERR-5
Ensure that the CD is not damaged or dirty.
Battery cable is not correctly connected. Connect the battery cable to the terminal that is always
live.
The disc, USB or SD device cannot be red in two minutes
USB/SD data error.
Communication error or component is damged.
Disc is upside down. Ensure the printed side is facing up.
Ensure that random mode is deactivated.
10. TROUBLE SHOOTING
EN - 11