Filter
Top Products
EN - 9
8. BLUETOOTH HANDS FREE & A2DP STREAMING OPERATION
Pairing a Bluetooth Device
You can make or receive phone calls with Bluetooth-enabled phones through the unit. You can also listen to
music from an A2DP Bluetooth-enabled device.
Before using the Bluetooth device, you need to pair the device to the unit. Pairing needs only to be done once.
1 Open your mobile phone and switch bluetooth on.
2 Search for other bluetooth device with your device.
1 Press MENU to enter into the system menu mode.
2 Once the [DISCONN ] is displayed, press to activate the manual Disconnect mode.
1 The phone should reconnect automatically every time you use the system.
4 Input the password “0000”
5 [CONNECTED] with mobile phone number will be displayed on the LCD display if pairing is successful,
and the paired device will connect to the car audio system automatically.
3 Select “TF2310” in the pairing list.
Disconnect the Bluetooth Device
Reconnect the Bluetooth Device
Making a Call
You can dial number using the mobile phone.
1 Use the Mobile Phone to dial and make an outgoing call.
2 Once you have completed dialing, [CALLING] is displayed.
2 If not, Press MENU to enter into the system menu mode. Once the [CONNECT ] is displayed, press
to manually Re-connect the phone.
>
>
1 Press on front panel, [REDAIL ] is displayed.
2 Press , unit will display [CALLING], and the unit starts dialing the previous number.
To redial a number
NOTE
To make an outgoing call on this unit, the Bluetooth connection between the unit and the phone must be active.
>
Receiving a Call
1 If there is an incoming call, the Caller ID is displayed. If the incoming.call has no Caller ID, [PHONE IN] is displayed.
2 Press to answer / accept the call.
3 When conversation ends, press to terminate the call.
Call Transfer
You can transfer audio from the car speakers to the phone during a call.
While talking, press and hold voice transfers from loudspeaker to mobile phone.
Bluetooth A2DP Audio Streaming
If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to
the music stored on the device through the unit. If the device also supports Audio Video Remote Control
Profile (AVRCP) profile, you can use the control on the unit or its playback function (eg iPOD Music) to play
music stored on the device.
1 Press MODE button repeatedly to select [BT AUDIO].
2 Press to start play, press it again to pause.
3 To track up/down, turn the track up/down on front panel.