Filter
Top Products
12
Français Español English
Listening to an External Audio Source
Connecting an external audio source
With the Multi-CD changer connected, any external audio devices you may have used with
your Wave
®
music system can be connected to the back of the Multi-CD changer. However,
you now need a dual RCA stereo cable.
The Wave
®
music system Multi-CD Changer provides two rear panel inputs (AUX 1 and AUX
2) for external audio devices such as TV, VCR, DVD player, cassette player, or MP3 player.
This gives you the advantage of hearing Wave
®
music system sound from a range of sources.
To connect a device, connect one end of the cable to the audio output jacks of the source
and the other end to one of the AUX inputs on the changer. Be sure to match the red and
white plugs on the cable to the red (R) and white (L) AUX jacks on the changer.
Use only a stereo connection. You will not hear the connected
device if just the left (L) or right (R) channel is connected.
Red
Red
Connection example: a TV connected to the Multi-CD Changer
Playing a connected audio source
To listen to a connected source:
1. Turn on the external device.
2. Press AUX on the Wave
®
music system remote control. Press AUX again to switch
between the AUX 1 and AUX 2 inputs. AUX 1 or AUX 2 appears on the display to confirm
your selection.
3. Adjust the volume using the Wave
®
music system remote control.
Note:
The Wave
®
music system remote control cannot turn a connected AUX device on or off, or
change its settings or selections.
Note:
Neither AUX 1 or AUX 2 can be selected as an alarm source.