Filter
Top Products
17
U
SING THE PERSONAL
®
MUSIC CENTER II
English FrançaisEspañol
Adjustable features of the PERSONAL
music center II
You can change some factory default settings of the PERSONAL
®
music center II to custom-
ize it as you like.
Press the Setup button near the bottom of the PERSONAL
®
music center II to see a list of the
feature settings you can change.
Note:
To learn more about house codes, room codes, and audio streams, refer to the sections
about these features.
To change settings for a feature
1. Tip the center bar down to move down the list in the Setup menu, and highlight
the feature you want to adjust (Figure 12).
2. Press the right arrow button
to move right for the setting options for the
selected feature.
3. Tip the center bar
up or down to move through the list and highlight the setting
you want.
4. Press the center bar
to confirm your choice.
5. Or, if you decide no change is needed, press the left arrow button
instead.
Following step 4 or 5 will exit the list of options and return to the features list.
Figure 12
Music center II features that
are adjustable
Back [Open]
Setup
Name: Bedroom
Room Code: I
Audio Stream: 2
Contrast: Default
Backlight Bright: 100%
Backlight: On
Feature Possible settings
Name Default: Bedroom.
Designates where you use this PERSONAL
®
music center II.
Choose from a list of possible rooms to label your music center and
distinguish it from any others.
Room Code Default: I.
Distinguishes each room (up to 15) connected to the system.
Choosing A will match the setting for the LIFESTYLE
®
remote in the
main room.
Choosing O allows the PERSONAL
®
music center II to work with older
(legacy) products, such as Bose
®
Acoustimass
®
5 powered speakers,
a Wave
®
radio, or other amplifiers, with limited functionality.
For further information about room codes, refer to “The importance
of room codes” on page 18.