Filter
Top Products
6 December 20, 2001 AM262838_00_V.pdf
Select the locations for your speaker system (cont.)
Acoustimass
®
module location
Follow these guidelines to select a location for the Acoustimass module.
1. Place the module along the same wall as the speakers, if possible.
2. Select a convenient location – under a table, behind a sofa. Do not allow furniture or
drapes to block the ventilation openings of the module.
3. Place the module within reach of the audio input cable, speaker cables, and an AC power
(mains) outlet.
4. Select a position for the Acoustimass module (Figure 3). For proper ventilation, place it on
the long edge, with the connectors facing the floor. An alternate position is on its largest
side, with the bass and treble controls facing up. Do not place the module on either end,
as shown by the last two views in Figure 3.
Figure 3
Acoustimass module positions
5. Once you have selected a position for the module, place the four self-adhesive rubber feet
near the corners of the bottom surface. The rubber feet provide increased stability and
protection from scratches.
6. Aim the port (the round opening) into the room or along the wall to avoid blocking the port
or creating too much bass.
7. For best bass performance, do not place the port at equal distances from any two walls or
from a wall and the ceiling.
RIGHT
RIGHT
OUTPUTS
OUTPUTS
TO
TO
CUBE
CUBE
SPEAKERS
SPEAKERS
LEFT
LEFT
AUDIO
AUDIO
INPUT
INPUT
OFF
OFF
POWER
POWER
ON
ON
®
®
T
r
e
b
l
e
B
a
s
s
®
®®
Note:
To avoid interference with the TV picture, place the Acoustimass module at least
18 inches (45 cm) from a TV.
CAUTION:
Do not cover the ventilation openings of the Acoustimass module. The slots on
the end provide ventilation for the built-in electronic circuitry, and should not be blocked.
Preferred
position
Alternate position
Setting Up
Before making connections, unplug your system
It is important that you unplug your Lifestyle
®
system or other music source before making
any connections.
Selecting the correct voltage
If you purchased a dual voltage product, please be sure that your speakers are set to the
correct voltage for your geographical area. Use the adapter plug provided when appropriate.
Figure 4
Voltage selector switch settings