Filter
Top Products
44
English
Reference
Taking care of your 3•2•1 or 3•2•1 GS system
Caring for your system may include cleaning the system’s enclosures, cleaning your discs,
and replacing the remote control batteries.
Cleaning the media center
• Use only a soft, dry cloth to clean the outside surfaces of the media center.
• Do not use any sprays near the system. Do not use any solvents, chemicals, or cleaning
solutions containing alcohol, ammonia, or abrasives.
• Do not allow liquids to spill into any openings.
Cleaning the speakers
• Clean the surface of your speakers with a soft, damp cloth. You can use an ammonia-free
window cleaner on a soft cloth to maintain the finish.
• Do not use any sprays near the speakers. Do not use any solvents, chemicals, or cleaning
solutions containing alcohol, ammonia, or abrasives.
• Do not allow liquids to spill into any openings.
• The speaker grilles require no special care, although you may vacuum them carefully
if necessary.
Cleaning discs
• Handle discs by their edges to prevent fingerprints and scratches (Figure 29a).
•To remove stains or fingerprints from the surface of a disc, use a soft and dry lint-free, cloth.
Wipe in straight movements from the center of the disc to the outside (Figure 29b). Do not
use any chemical products; they can damage the disc.
• Do not use a circular motion to clean (Figure 29c).
• Do not write on or attach labels to the surface of a disc.
•To minimize exposure to dust and dirt, return discs to their cases after use. Store each disc
in its case, away from direct sunlight, high temperatures, and humidity.
Figure 29
Disc care
Replacing the remote control batteries
Slide open the battery compartment (Figure 30).
Notice the polarity markings (+ and –) inside the compartment and install the batteries
accordingly. Slide the battery compartment cover back into place.
Figure 30
Putting in the batteries
a.
b. c.
AA batteries (IEC R6)
Battery
compartment cover
+
+
–
–
book Page 44 Friday, August 29, 2003 9:20 AM
AM271966_00_V.pdf • August 18, 2003AM271966_00_V.pdf • August 18, 2003AM271966_00_V.pdf • August 18, 2003
AM271966_00_V.pdf August 18, 2003
AM271966_00_V.pdf August 18, 2003
AM271966_00_V.pdf August 18, 2003