Filter
Top Products
15
System Setup
English
3. Plug the connector labeled LEFT into the jack on the rear of the left speaker (Figure 12).
4. Plug the connector labeled RIGHT into the rear jack on the right speaker.
Figure 12
Making the left and right
speaker connections
Note: When properly inserted, there will be a small gap between the plug and the
speaker panel.
Left and right speaker placement
For optimal audio surround effects, be sure to place the LEFT speaker to the left of the TV as
you face it. Place the right speaker to the right of the TV as you face it (Figure 13).
Figure 13
Left and right speaker
placement
Connecting the Acoustimass
®
module
1. Locate the jack labeled MEDIA CENTER on the rear of the Acoustimass
®
module. Insert
the right-angle connector (Figure 14) of the module cable into the MEDIA CENTER jack.
2. Locate the jack labeled ACOUSTIMASS MODULE on the rear panel of the media center.
Insert the other end of the module cable into the ACOUSTIMASS MODULE jack.
3. Firmly tighten the two screws at each end of the module cable.
Figure 14
Connecting the
Acoustimass module to the
media center
WARNING: Do not plug the Acoustimass module’s power cord into the wall outlet until all
other system connections have been made.
RIGHT
LEFT
LEFT speaker
RIGHT speaker
L
R
L
R
D
D
L
R
C
S
C
S
L
R
O
IDEO 2 AUX
AUDIO INPUT
AUDIO
OUTPUT
VIDEO
OUTPUT
VIDEO
INPUT
SPEAKERS
ACOUSTIMASS MODULE
AC INPUT
MEDIA CENTER
Acoustimass
module cable
book Page 15 Friday, August 29, 2003 9:20 AM
AM271966_00_V.pdf • August 18, 2003AM271966_00_V.pdf • August 18, 2003AM271966_00_V.pdf • August 18, 2003
AM271966_00_V.pdf August 18, 2003
AM271966_00_V.pdf August 18, 2003
AM271966_00_V.pdf August 18, 2003