Filter
Top Products
10
System Setup
English
WARNING: Choose a stable and level surface for both speakers. Vibration can cause the
speakers to move, particularly on smooth surfaces like marble, glass, or highly polished
wood. If you are placing the speakers on a flat surface, be sure to attach the smaller of the
two sets of supplied rubber feet to the bottom surface. You may obtain additional rubber feet
(part number 178321) from Bose
®
customer service. To contact Bose, refer to the list of offices
included in the product carton.
Be sure each 3•2•1 or 3•2•1 GS speaker faces straight ahead toward the listening area. Do
not place the speakers at an angle (Figure 3).
Figure 3
Recommended placement
of the 3•2•1 and 3•2•1 GS
speakers, facing straight
ahead toward the listening
area, not angled
Note: Angling one or both speakers into or away from the listening area significantly alters
system performance.
The 3•2•1 and 3•2•1 GS speakers are designed to sit only on their bottom surface, with the
Bose logo right-side up (Figure 4).
Figure 4
Recommended orientation
of the speakers, with Bose
logo upright, not angled or
upside down
book Page 10 Friday, August 29, 2003 9:20 AM
AM271966_00_V.pdf • August 18, 2003AM271966_00_V.pdf • August 18, 2003AM271966_00_V.pdf • August 18, 2003
AM271966_00_V.pdf August 18, 2003
AM271966_00_V.pdf August 18, 2003
AM271966_00_V.pdf August 18, 2003