Filter
Top Products
INTRODUCTION
Congratulations on your purchase of the world’s finest brand of car audio amplifiers. We have
invested tremendous effort in the design process of the new
VELOC/TT”series
amplifiers in order
to achieve superior musical performance. Leading edge technologies such as Distortion Limiting
and
HUSHTM
noise reduction and gating, previously found only in the professional audio sound
reproduction and enhancement market, have been implemented into your
VELOCITYT”
amplifier
which has been designed and assembled in the United States of America. For maximum
performance and reliability we highly recommend that your new VELOC/w”’ series amplifier be
installed by an authorized Blaupunkt dealer. We also recommend Blaupunkt cd or cassette units,
speaker systems, and accessories to expand the listening experience which might be limited by
lesser quality components.
Finally, we remind you to practice safe listening habits using common sense. Continuous exposure
to listening levels over 100 decibels may cause permanent hearing loss. Many high power, multi-
speaker systems today are capable of Sound Pressure Levels exceeding 130
dB.
OWNER’S RECORD
. .
del and warranty numbers are located on the bottom of the unit. Please record these
s in the space provided below. Refer to these numbers whenever you call upon your
Blaupunkt dealer.
MODEL:
WARRANTY NUMBER:
PURCHASE DATE:
DEALER/INSTALLER:
KEY FEATURES
DISTORTION LIMITING (THD,) reduces the annoying acoustical pops and cracks present during
high signal levels. It is acoustically transparent until high signal levels thus providing protection
for tweeters since high level distortion products are not allowed to enter the speakers.
HUSHTM
NOISE GATING AND REDUCTION offers tremendous noise reduction for background
hiss that may be picked up in the installation or from recorded music played back via AM, FM,
or even compact disc.
MULTI-MODE SPEAKER CAPABILITY allows the consumer to cost effectively create a
satellite/subwoofer system with remarkably good performance from a single amplifier.
REMOTE GAIN AND HUSH CONTROLS are available using the optional remote control, RM-1.
This remote can change gains of the entire system (multiple amplifiers) or only a subwoofer
amplifier if so configured.
TONE AND BASS BOOST CONTROLS provide frequency response tailoring for the end listener
that cannot be achieved from the radio controls.
1 OHM STABILITY allows for paralleling of multiple speakers for increased sound pressure level.
CONTINUOUSLY VARIABLE HIGH-PASS/LOW-PASS CROSSOVERS allow you to better
istribute amp power thus lowering system distortions and increasing system sound loudness.
IDE RANGE INPUT GAIN CONTROLS (0.3
-
6.0 V
rms)
allow for a variety of radio interface
voltages, even directly from the high level outputs of many factory radios.
3