Filter
Top Products
ACCESSORIES /
ACCESSOIRES
/
ACCESORIOS
There are four accessories available for your Velocity amplifier which increase its flexibility and
guarantees high performance for years to come.
1
2.
3.
4.
RM-1, REMOTE CONTROL: This control offers the consumer
the capability of remotely controlling the gain of a subwoofer
amplifier, or multiple amplifiers, from the front seat of the car.
The control also has the capability to change the threshold
(turn-on point) for the
HUSHTM
noise reduction inside the
amplifiers. This control uses simple telephone wire and RJ-11
jacks to interconnect and is insensitive to vehicle noises.
BB-1, BASS BRIDGE: Mixed mode stereo/mono can be
created using simple passive components (coils and capacitors)
but can be confusing for the average installer. We highly
recommend that the BB-1 be used to avoid possible confusion
and ensure proper operation.
EC-l, END CAP: If only one amplifier is installed in a car,
these end caps can be placed at either end of this amp to
protect the control settings and wires. If two or more amps
are used, an EC-l can be mounted between two amps to
“bridge” the gap between the two amps thus trimming out the
appearance nicely.
CB-1, CAPACITOR BANK: The main benefit of any kind of
capacitance at the power line into the amp is for power
stabilization. This problem may show up as the vehicle’s
headlights “dancing” with the music. It may also be heard as
“singing” noises from inside the amplifier due to heavy current
loads. The CB-1 simply connects to the power terminals of the
amp in parallel with those from the vehicle.
I
RM-1 REMOTE GAIN CONTROL
OTHER NOTES
/
AUTRES NOTES
/
OTRAS NOTAS
54