8
Switching On and Off
The device can be switched on and off
in the following ways:
Switching On and Off with the
Vehicle Ignition
If the device is correctly connected to
the vehicle ignition, and has not been
switched off with button A, it is switched
on and off along with the ignition.
You can also switch the device on when
the ignition is off:
➮ Press button A.
Note:
● To protect the vehicle battery, the
device is automatically switched off
after an hour if the vehicle ignition
is off.
Switching On and Off with the
release panel
➮ Remove the release panel.
The device switches off.
➮ Replace the release panel.
The device switches on. The last func-
tion used (radio, cassette, CD-changer
or AUX) is activated.
Switching on and off with button A
➮ Press button A to switch on.
➮ To switch off, hold button A
pressed for longer than two sec-
onds.
The device switches off.
Switching on by inserting a cassette
If there is no cassette in the device when
it is switched off:
➮ Push the cassette gently into the
device, with the open side to the
right, until you feel it stop.
The cassette is automatically drawn into
the device.
While the cassette is being drawn in,
do not push or pull it.
The device switches on. The cassette
starts playing.
SWITCHING ON AND OFF