Filter
Top Products
14
Changing Display Contents
To change the display between track
number plus CD number and track num-
ber plus play time
➮ Press the MENU button =.
➮ Press the or button < until
“CDC DISP” appears in the display.
➮ Press the button <.
The current display mode is shown:
“TIME” for play time and “CD NO” for
CD number.
➮ Select the desired setting with the
button <.
➮ Press the MENU button = twice.
Repeat Playing Tracks or Whole
CDs (REPEAT)
To repeat the current track
➮ Press button 3 (RPT) > briefly.
“RPT TRCK” flashes up briefly and the
display shows “RPT”.
To repeat the current CD
➮ Press button 3 (RPT) > again.
“RPT DISC” flashes up briefly and the
display shows “RPT”.
Stopping REPEAT
To stop the repetition of the current track
or CD
➮ Press button 3 (RPT) > until the
display shows “RPT OFF” and
“RPT” disappears.
Playing Tracks in Random
Sequence (MIX)
To play the tracks of the current CD in
random sequence
➮ Press button 4 (MIX) > briefly.
“MIX CD” flashes up, the display shows
“MIX”.
To play the tracks of all the CDs in the
CD changer in random sequence
➮ Press button 4 (MIX) > again.
“MIX ALL” flashes up and the display
shows “MIX”.
Ending MIX function
To end the playing of tracks in random
sequence
➮ Press button 4 (MIX) > until the
display shows “MIX OFF” and
“MIX” disappears.
Sampling All Tracks on All CDs
(SCAN)
To listen to a short sample of all tracks
on all the CDs in the CD changer
➮ Press the SCAN button 4.
“SCAN” appears in the display.
Ending SCAN
To halt the scan
➮ Press SCAN 4 again briefly.
The track currently being sampled will
continue to play.
CD CHANGER OPERATION