Filter
Top Products
10
Radio Operation
Switching on Radio Operation
If the current operating mode is cas-
sette, CD-changer or AUX
➮ Press the BAND button 2.
or
➮ Press the CD•C button : until
“RADIO” appears in the display.
Select Waveband/Memory Level
This radio receives stations in the FM
and AM wavebands. Three memory lev-
els are available for the FM waveband,
and one memory level for the AM wave-
band. Each memory level can be used
to store five stations.
Selecting FM Memory Level
To switch between the FM memory lev-
els FM1, FM2 and FMT
➮ press the BAND button 2.
Selecting AM waveband
To select the AM waveband
➮ press the BAND button 2 until
“AM” appears in the display.
Setting the Station
There are a number of ways to set the
station.
Automatic Station Search
➮ Press the or button <.
The next station that can be received is
tuned in.
Adjusting Station Search
Sensitivity
You can choose whether to search only
for stations with strong signals, or wheth-
er weak stations should be included.
➮ Press the MENU button =.
➮ Press the or button < until
“SENS HI” or “SENS LO” appears
in the display.
“SENS HI” means maximum sensitivi-
ty, “SENS LO” means minimum sensi-
tivity. When “SENS LO” is selected, the
display shows “lo”.
➮ Set the desired sensitivity with the
buttons <.
When the setting procedure is complete,
➮ press the MENU button =.
Manual Station Tuning
You can also tune to the station manu-
ally.
➮ Press the or button <.
RADIO OPERATION