Filter
Top Products
CT610 / CT310 Front Panel
1. The front panel Vacuum Florescent Display (VFD) displays what zone you are controlling.
2. The Volume Control adjusts volume of the displayed zone.
3. Stereo headphones with a standard ¼ inch plug connect here. The receiver must be on and
in HEADPHONE Mode for proper headphone operation. Headphone mode available in Zone A.
4. The Master Power Switch is only used to completely power off the CT Receiver. Normally, use
the Sleep button to power the CT610/310 on or off from the front panel. There is very low electrical
consumption when the unit is “sleeping” (35 watts drawn during sleep).
5. The front panel buttons:
CT Receiver Front Panel (CT602/600/300)
1. Front panel IR receiver window.
2. Main Power Indicator.
3. Master power switch, described above.
B&KComponents,Ltd.
B & K Components,Ltd.
Power
On/Off
6ZoneReceiver
CT600
Power
Indicator
Sleep
Headphone Preset
Enter Save Source Menu
Zone
Power
On/Off
6ZoneReceiver
Down
Up
CT610
B&KComponents,Ltd.
¿
Parts and Accessories Guide
4
Sleep - puts the zone displayed on
the front panel in standby mode.
Preset - Steps through favorite
audio/video presets for instant recall
of setups.
Enter - Confirm selection or display
current status of the receiver.
Step UP and Step DOWN for menus
and tuner frequency.
Save - Pressing SAVE followed by
ENTER saves a favorite preset.
Source - Steps through the various
sources for the displayed zone.
Menu - Displays the MAIN menu.
When menus are active, it selects
the previous menu.
Zone - Steps through the zones. You
control the zone that is displayed.
2
4
5
2
3
3
1
t
¿
1