Filter
Top Products
Page / Event - Tab 7
BK&
SBIMPLY ETTER!
48
1
2
A Page/Event is an action triggered by a 1-24VAC or DC trigger (Common Control), RS-232 command, or
Audio Video Sense.
1. Action:
When this Event is triggered, choose between switching to one of the nine shared sources, changing the vol-
ume or no action at all (OFF). When one of the nine shared inputs is selected, both volume level and input
will be affected when the Page/Event is triggered. To only adjust volume level during a Page/Event choose
“Change Volume.”
Note: The Page/Event default setting is (BOTH), all zones will be affected by both Page/Events. Page/Event
1 will switch to input 8, Page/Event 2 will switch to input 9. However, you can override this on TAB 9 of
BKcSuite, in the Zone Page/Event selection box shown below.
(From Tab 9)
2. Activated By:
Select the desired application to determine when the Event is ACTIVE. If you select Audio or Video Sensing,
an audio or video signal coming in to the selected input (the selected input in the previous step) will trigger
the Event as long as signal is present. If Common Control is selected, then a voltage must be present at the
Common Control 1 IN+ and IN-. If you select RS-232, the event will be triggered and ended by RS-232 com-
mand strings. When using RS-232, the event must be asserted and deasserted.