Filter
Top Products
14
3.3.5 Connections with Adapters
In some cases, it may be appropriate to connect the inputs and outputs of the ULTRAMATCH to other devices
by means of adapter units. For example, if you want to connect two DAT recorders to the ULTRAMATCH at the
same time, and each of these recorders features only an SPDIF interface (RCA), you can easily connect one
of these recorders to the ULTRAMATCH by means of an RCA-XLR adapter. The figure below shows e. g. the
correct wiring of the adapter cables for input connection.
signal flow
unit A output
S/PDIF
ULTRAMATCH
input
1 2
3
shield
cable
tip
sleeve
Fig. 3.6: Adapter Wiring for RCA Output to ULTRAMATCHs XLR Input
3. INSTALLATION