Filter
Top Products
11
E
3. INSTALLATION
Your BEHRINGER ULTRAMATCH was carefully packed in the factory and the packaging was designed to
protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging
and its contents for any signs of physical damage, which may have occurred in transit.
+ If the unit is damaged, please do not return it to us, but notify your dealer and the shipping
company immediately, otherwise claims for damage or replacement may not be granted.
Shipping claims must be made by the consignee.
3.1Rack Mounting
The BEHRINGER ULTRAMATCH fits into one standard rack unit of space (1 3/4"). Please allow at least an
additional 4" depth for the connectors on the back panel.
+ Be sure that there is enough air space around the unit for cooling and please do not place the
ULTRAMATCH on high temperature devices such as power amplifiers etc. to avoid overheat-
ing.
3.2Mains Connection
The mains connection of the ULTRAMATCH is made by using a mains cable and a standard IEC receptacle.
It meets all of the international safety certification requirements. Please make sure that all units have a proper
ground connection. For your own safety, it is advisable not to remove the ground connection within the units or
at the supply, or fail to make this connection at all.
+ Before you switch on the unit, check that it is configured to match your AC mains voltage