Behringer PMH660M Speaker User Manual


 
8
EUROPOWER PMH660M/PMH880S
4. INSTALLATION
SPACE RADIO: Here, the typical sound of scanning an FM
tuner is simulated. This can be a very interesting effect when
sound-tracking radio plays.
TEST TONE: Use this 1-kHz test tone to facilitate P.A. level
setting.
4. INSTALLATION
4.1 Mains connection
Blown fuses must be replaced by fuses of the same type and
rating.
The mains connection is made using the enclosed power cord
and a standard IEC receptacle. It meets all of the international
safety certification requirements.
+ Please make sure that all units have a proper
ground connection. For your own safety, never
remove or disable the ground conductor from the
unit or of the AC power cord.
4.2 Audio connections
The inputs and outputs of the BEHRINGER EUROPOWER are
unbalanced 1/4" TS connectorsexcept for the balanced mono
line inputs. Of course, all inputs and outputs work with both
balanced and unbalanced connectors. The Tape Ins and Outs
are on stereo RCA connectors.
+ Please ensure that only qualified personnel install
and operate the power mixer. During installation
and operation, the user must have sufficient
electrical contact to earth. Electrostatic charges
might affect the operation of the unit.