Filter
Top Products
12
EUROPOWER PMH660M/PMH880S
6. SPECIFICATIONS
6. SPECIFICATIONS
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior
notice. Specifications and appearance may differ from those listed or illustrated.
Type
Mic E.I.N. (20 Hz - 20 kHz)
@ 0
Ω
source resistance
@ 50
Ω
source resistance
@ 150
Ω
source resistance
Gain
Max. input level
Impedance
Signal-to-noise ratio
Noise (THD + N)
Type
Impedance
Max. input level
Type
-
1/4" TRS connectors, unbalanced
Impedance
-
approx. 100
k
Ω,
unbalanced
Max. input level
-
+21 dBu
Low
Mid
High
Type
Impedance
MAIN
Type
Impedance
Max. output level
MONITOR
Type
Impedance
Max. output level
Type
-
1/4" TRS connectors, unbalanced
Impedance
-
approx. 150
Ω
,
unbalanced
Max. input level
-
+21 dBu
Type
RCA, mono output
RCA
Impedance
approx. 1
k
Ω
approx. 1
k
Ω
Max. input level
+21 dBu
+21 dBu
Noise
MAIN MIX @ -oo
Channel fader -oo
MAIN MIX @ 0 dB
Channel fader -oo
MAIN MIX @ 0 dB
Channel fader @ 0 dB
Type
Load impedance
MAIN L/R
-
4 - 8
Ω
MONITOR/MAIN MONO
MAIN MONO/MAIN MONO
BRIDGE
Converter
Dynamics D/A
Sampling rate
Delay Time
Signal run time (Line In > Line Out)
Type
2-digit, 7-segment LED
2 x 2-digit, 7-segment LED
Output power @ 4
Ω
2 x 300 W
2 x 400 W
Output power @ 8
Ω
2 x 150 W
2 x 200 W
Output power @ 8
Ω
(
BRIDGE)
1 x 600 W
1 x 800 W
Mains voltage
Power consumption
500 W
700 W
Fuse
250 V
250 V
Mains connector
8.5 kg
9.4 kg
18.74 lb.
20.73 lb.
-88 dB/-91 dB A-weighted
-84 dB/-86 dB A-weighted
XLR, electronically balanced input circuit
110 dB / 114 dB A-weighted (0 dBu In @ +10 dB gain)
+12 dBu @ +10 dB gain
approx. 2.2 kΩ balanced / 1.1 kΩ unbalanced
Frequency response
IEC standard receptacle
-112 dB / 114 dB A-weighted
-112 dB / 114 dB A-weighted
-112 dB / 114 dB A-weighted
< 10 Hz - > 200 kHz (-3 dB)
< 10 Hz - 200 kHz (-1 dB)
-102 dB/-106 dB A-weighted
+30 dB, +10 dB with pad
approx. 20 k
Ω,
balanced
+21 dBu
0.001% / 0.0007% A-weighted
1/4" TS connectors, balanced
12 kHz / +/-15 dB
+21 dBu
80 Hz / +/-15 dB
2.5 kHz / +/-15 dB
RCA
approx. 10 kΩ
1/4" TS connectors, unbalanced
approx. 150 Ω, unbalanced
1/4" TS connectors, unbalanced
approx. 150
Ω,
unbalanced
+21 dBu
85 - 250 V~, 50 / 60 Hz
4 - 8
Ω
Output power
approx. 1.5 msecs
90 dB
4 - 8
Ω
NEUTRIK
®
SPEAKON
®
-compatible
46.875 kHz
max. 5 secs
24-bit Delta-Sigma, 64/128-times oversampling
8 - 16
Ω
Dimensions (H x W x D)
approx. 12 2/5" x 18 1/10" x 8 3/5"
Weight
approx. 315 mm x 460 mm x 220 mm