Filter
Top Products
5
EUROPOWER PMH660M/PMH880S
2. CONTROL ELEMENTS
The LEVEL control adjusts the channel signal level in the
main mix.
2.1.1 Input section
The CLIP LED is very useful to control the input gain. It
should never be constantly illuminated (only with signal
peaks).
The PAD switch reduces the input sensitivity of the channel
by approx. 30 dB, to connect for example line-level signals.
The balanced HI-Z input (1/4" TRS) can be used for line-
level signal sources, e.g. keyboards, electric guitars and
basses.
Each channel has a balanced LOW-Z microphone input
with XLR connectors, which also supply the +48 V phantom
power for condenser microphones (see ).
Unbalanced stereo line inputs with 1/4" connectors for
stereo channels 7 to 10 of the PMH880S. They can be
used for connecting keyboards with stereo outputs or
stereo drum machines.
+ Please remember to use either the microphone or
the line input of a channel at a time, but never both
at the same time!
2.2 Effects section
List of all multi-effects presets.
LED level meter of the effects processor. Since the
PMH880S allows you to select two effects simultaneously,
it also has two level meters (DUAL FX). Be sure that the
clip LED illuminates for signal peaks only. If it is illuminated
all the time, it is a sign that the effects processor is
overloading and hence producing unpleasant distortion.
The EFFECT display (PMH880S: two displays) shows the
currently selected preset.
Turn the PROGRAM control (PMH880S: one control each
for FX 1 and FX 2) to select an effects preset (preset
an?