Filter
Top Products
10
EUROPOWER PMH660M/PMH880S
5. WIRING EXAMPLES
For stereo operation the POWER AMP switch of the
PMH880S must be set to its upper position (MAIN L/MAIN R). Outputs
A and B deliver the stereo main signal to the P.A. speakers. Two
active speakers, wired in parallel, are connected to the PREAMP
MONITOR output. They are used as on-stage monitor speakers.
The effects processors can be switched on and off with a dual
footswitch. This set-up is not possible with the PMH660M (no
stereo operation possible).