Behringer T1952 Stereo Equalizer User Manual


  Open as PDF
of 34
 
32
TUBE COMPOSER T1952
6. SPECIFICATIONS
Audio input
Connectors XLR and 1/4" TRS
Type RF filtered, servo-balanced input
Impedance 50 kOhm balanced, 25 kOhm unbalanced
Nominal operating level +4dBu/-10dBV switchable
Max. input level +21dBu balanced and unbalanced
CMRR typ. 40dB, >55dB @ 1 kHz
Audio output
Connectors XLR and 1/4" TRS
Type electronically servo-balanced output stage
(optional transformer-balanced)
Impedance 60 Ohms balanced, 30 Ohm unbalanced
Max. output level +21dBu, +20dBm balanced and unbalanced
SC input
Connector 1/4" TRS
Type RF filtered, DC de-coupled, unbalanced input
Impedance >10 kOhm
Max. input level +21dBu
SC output
Connector 1/4" TRS
Type RF filtered, DC de-coupled, unbalanced output
Impedance 2 kOhm
Max. output level +21dBu
System specifications
Bandwidth 18Hz to 30 kHz, +/- 3dB
Signal-to-noise ratio >100dB, unweighted, 22Hz to 22 kHz
THD 0.008 % typ. @ +4dBu, 1 kHz, Gain 1
0.04 % typ. @ +20dBu, 1 kHz, Gain 1
IMD 0.01 % typ. SMPTE
Crosstalk <-100dB, 22Hz to 22 kHz
Stereo coupling true RMS detection
Expander/gate section
Type IRC (Interactive Ratio Control) expander
Threshold variable (OFF to +15dB)
Ratio variable (1:1 to 1:8)
Attack <1 ms / 50dB, program dependent
Release variable (SLOW: 100 ms / 1dB, FAST: 100 ms / 100dB)
Compressor section
Type IKA (Interactive Knee Adaption) compressor
Threshold variable (-40dB to +20dB)
Ratio variable (1:1 to oo:1)
Threshold characteristics variable (Interactive or Hard Knee)
Auto characteristics wave adaptive compressor
Manual attack time variable (0.5 ms / 20dB to 100 ms / 20dB)
Manual release time variable (0.05 ms / 20dB to 5 s / 20dB)
Auto attack time typ. 15 ms at 10dB, 5 ms at 20dB, 3 ms at 30dB
Auto release time program dependent, typ. 125dB/s
Output variable (-20 to +20dB)
6. SPECIFICATIONS
 previous next