Barco PGWX-62L-K Home Theater System User Manual


 
36
PGWX-62L/PGWU-62L/PGWX-62L-K/PGWU-62L-K - - 2015/07/27
4. User Controls
4.1.2.6 Control Menu
Standby 5V
Switch on/off for the 5V output in standby.
Off: Default value. 5V output off in standby. y
On: 5V output on in standby. y
Eco network power
Switch on/off the network power to save power.
Off: Default value. Network is enable in standby and the power consumption is under 3W. y
On: Network is not available in standby and the power consumption is under 0.5W. y
RS232 baudrate
Select RS232 baudrate.
9600: Default value for this function. y
19200/115200: Other options. y
Network
View the relevant network information.
IP Address: Default value is 192.168.0.100. y
Subnet Mask: Default value is 255.255.255.0. y
Gateway y
DHCP: Default value is Off, key in the IP address manually and press APPLY. y
Apply: y
The DHCP function must be set to “On” and press “Apply” to get the IP address from DHCP server -
automatically.
It takes several seconds to get the IP. -
In case of fail to get the IP address, please re-apply again. -
Menu position
Shift the menu box to a position.
Center y
Top Left: Default value for this function. y
Top Right y
Bottom Left y
Bottom Right y
OSD lite
Enable/disable the OSD lite menu.
On: Default value. The OSD lite menu is enabled. y
Off: The OSD lite menu is disabled. y
CONTROL
Standby 5V
RS232 baudrate
Network
Menu position
Auto source
Language
Enter
Top Left
Off
Enter
Off
Eco network power
On
OSD lite
On