Barco PGWX-62L-K Home Theater System User Manual


 
28
PGWX-62L/PGWU-62L/PGWX-62L-K/PGWU-62L-K - - 2015/07/27
4. User Controls
Input
Image
Layout
Light source
Alignment
Control
Service
Input Input Select
Input Select Enter
Auto Power Off On
Auto Power On Off
No Signal Logo
A Image Adjust Always
3D Mode Off
3D Invert Off
HDMI
VGA
DVI
CVBS
INPUT BRIGHTNESS CONTRAST COLOR
ASPECT RATIO
LENS FOCUS
LENS ZOOM
LENS SHIFT
KEYSTONE LANGUAGE INFO MODE
SERVICE ADVANCED
4.1.2 Using the Advanced OSD Menus
Procedure:
Select the Advanced button in OSD Lite Menus to enter advanced menu.1.
When the advanced OSD displays, use the arrow keys to navigate in the menu and enter to a 2.
desired item.
Use the UP/DOWN buttons to select the desired item in the submenu and adjust the settings with the 3.
LEFT/RIGHT buttons or press ENTER to go to another submenu.
Select the next item that you want to adjust in the submenu and adjust it as described above. When 4.
each item is adjusted, the projector saves the new setting.
Press HOME to return to the previous menu.5.
To exit the OSD menu, press HOME again.6.
Advanced OSD
SettingSubmenu Another Submenu
Advanced OSD Menu