Bang & Olufsen 10 Speaker User Manual


 
7
Set positions for the television to turn to
If your television is equipped 
with the optional motorised 
stand, you can turn it using the 
remote control. 
Furthermore, you can program 
the television to turn automatically
to face your favourite viewing 
position when you switch on the 
television. It can turn to a different 
position when you listen to, for 
example, a connected radio, and 
turn away to a standby position 
when you switch it off. 
You can also turn your television 
by hand. 
NOTE! For information about rst-
time installation of the motorised
stand, see Getting Started.
Choose one position for when you switch
the television on, one for audio mode,
and one for when you switch it off.
> Bring up the TV SETUP menu and highlight 
OPTIONS. 
> Press the centre button to bring up the 
OPTIONS menu and highlight STAND 
POSITIONS. 
> Press the centre button to bring up the 
STAND POSITIONS menu. 
> Press the centre button to determine the 
VIDEO position. 
> Use   and   to turn the television and 
place it according to your viewing position. 
> Press the centre button to store the 
position. 
To store a stand position for when an
audio source is switched on from the
television …
> Highlight AUDIO. 
> Press the centre button to determine the 
AUDIO position. 
> Use   and   to turn the television and 
place it as you wish. 
> Press the centre button to store the 
position. 
To store a stand position for when the
television is switched to standby …
> Highlight STANDBY. 
> Press the centre button to determine the 
STANDBY position. 
> Use   and   to turn the television and 
place it as you wish. 
> Press the centre button to store the 
position. 
> During rst-time setup, press the green
button to continue rst time-setup, 
otherwise … 
> … press and hold BACK to leave all menus. 
STAND POSITIONS
VIDEO
AUDIO
STANDBY
STAND ADJUSTMENT