Bang & Olufsen 10 Speaker User Manual


 
11
Register additional video equipment
If you connect additional video 
equipment to your television, 
you must register the equipment 
in the CONNECTIONS menu. 
The CONNECTIONS menu appears 
automatically on the screen 
during rst-time setup for you to 
register connected equipment,  
if it is not detected automatically 
by the television. If you connect 
equipment at a later date, you 
must register this equipment in 
the CONNECTIONS menu. 
Registering the equipment connected
to the television enables you to operate
it with your remote control.
> Bring up the TV SETUP menu and highlight 
OPTIONS. 
> Press the centre button to bring up the 
OPTIONS menu. CONNECTIONS is 
highlighted already. 
> Press the centre button to bring up the 
CONNECTIONS menu. 
> Use the navigation button up or down to 
step between the different socket groups: 
AV1, AV2, AV3, AV4, AV5, AV6, HDMI 
EXPANDER and HDMI MATRIX when 
available. 
> Press the centre button to be able to 
register a connected product type to the 
highlighted socket group. 
> Use the navigation button up and down 
to move between the sockets in the group. 
> Use the navigation button left or right to 
register what you have connected to the 
highlighted socket. 
> Press the centre button to be able to 
select the product from an on-screen list. 
> Use the navigation button left or right to 
see lists for other types of products. 
> Use the navigation button up or down or 
a number button to highlight the name of 
the product and press the centre button 
to register it. 
> Press the green button to be able to 
name the source. The naming menu is 
now activated. 
> Use the navigation button up and down 
to nd the individual characters in the 
name. 
> 
Press the centre button to accept the name.
The available sockets may vary according to
your setup.
> Names are shown in the television on-
screen display when the source is selected. 
> Press the centre button to bring up the 
STANDBY OPTIONS menu. 
> Use the navigation button up or down to 
see the list of standby options for when 
the connected equipment should switch 
to standby. 
> Press the centre button to select a 
standby option. 
> When you have completed your settings 
for a single socket group, press the 
centre button to return to the 
CONNECTIONS menu. 
> Repeat the procedure for each socket 
group. 
At rst-time setup only, when you have
registered all connected equipment, press
the green button to store the setup.
What is connected?
CONNECTIONS
AV1 NONE
AV2 NONE
AV3 NONE
AV4 NONE
AV5 CAMERA
AV6 NONE
HDMI EXPANDER NO
HDMI MATRIX NO